Bikeman Performance
Polaris RZR Pro R Camshafts
This is the most popular Performance upgrade for the Polaris Pro R RZR. Our custom cams offer the best price per horse power. These performance camshafts had 9 revisons before we released them to the market. Our optimized lobe duration maximizes air and fuel to enter the engine to maximize combustion. This modification brings no added wear and tear to the motor and is just as safe as a stock camshaft.
Features:
- 270hp with ECU tune and slip on exhaust.
- 30hp with Cams at 8650 rpm's
- collab with the most renowned 4cyl perfomance parts brand, Brian Crower
- Stock HP 230-235, 270hp with our Torque Link tune and slip on.
- Hard Flash is REQUIRED with this kit
- No additional head upgrades required
- Professional Installation Recommended or prior enigine experience
Steps for starting your Pro R stage 3 and above for the first time.
- Roll the engine over by hand at least 10 revolutions clockwise when looking at it from the rear.
- Check Cam timing to make sure it is correct
- Make sure coolant and oil is at the correct level.
- Start the engine and hold above 2000rpm until it reaches 170 degrees F.
- Using the throttle drop rpm 50 rpm per 30 seconds until idle seems unstable.
- Stay at the unstable rpm until it becomes stable and then repeat step 5.
- Once the machine is idling at 1450 stable with no throttle input let sit and idle for 10-15 minutes.
- Your machine is now ready to ride.
- On higher duration cams it is common to need to give a little throttle to start the vehicle this is completely normal.
VEHICLE FITMENT
Polaris RZR Pro R